Thread Cube

60,00 100,00 

The convenient Thread Cube with a 1/4 inch or 3/8 inch screw plate and ARRI Locating Pins for attaching a variety of accessories to cameras, monitors and wireless focus units.

Clear selection
SKU: CG-TC-1 Category:

Description

The Thread Cube is a very useful camera accessory mounting cube, for a flexible and compact camera setup.

The 20x20mm cube itself has both the classic camera threads 1/4″-20, as well as 3/8″-16 on 3 sides each and therefore allows a connection of:

  • 1/4″-20 thread to 1/4″-20 thread straight through
  • 1/4″-20 thread to 3/8″-16 thread straight through
  • 3/8″-16 thread to 3/8″-16 thread straight through
  • 1/4″-20 thread to 1/4″-20 thread over 90 degrees
  • 1/4″-20 thread to 3/8″-16 thread over 90 degrees
  • 3/8″-16 thread to 3/8″-16 thread over 90 degrees

With the pre-assembled 1/4″ Cube Plate and the included 1/4″-20 screw, which can be fastened through the cube using a 4mm Allen key, the following options are also available:

  • 1/4″-20 Screw to 1/4″-20 thread straight through
  • 1/4″-20 screw to 3/8″-16 thread straight through
  • 1/4″-20 screw to 1/4″-20 thread over 90 degrees
  • 1/4″-20 Screw to 3/8″-16 Thread over 90 degrees

With the 3/8″ Cube Plate and the included 3/8″-16 screw, which also can be fastened using a 4mm Allen key, the following options are also available:

  • 3/8″-16 Screw to 1/4″-20 thread straight through
  • 3/8″-16 screw to 3/8″-16 thread straight through
  • 3/8″-16 screw to 1/4″-20 thread over 90 degrees
  • 3/8″-16 Screw to 3/8″-16 Thread over 90 degrees

Several Thread Cubes with their 1/4″ and 3/8″ Cube Plates, which can be mounted on 4 sides of the cube, can be connected and combined in any way desired.

The Thread Cube as well as the Cube Plates are twist protected by the ARRI Locating Pin compatible holes which allow a stable mounting in 90 degree and 45 degree steps. The Locating Pins of the Cube Plate can be easily removed or relocated using a 1.5mm Allen key.

Included in delivery is the Thread Cube, the chosen Cube Plates with screw, 2x black M3 countersunk screws for mounting the plate and 2x black M1.6 screws for the twist protection.

Additional information

Select

one CubePlate with 1/4" & 3/8" Screw, two CubePlates with 1/4" & 3/8" Screws, three CubePlates with 1/4" & 3/8" Screws

You may also like…

1/4″ & 3/8″ Screws
1/4″ & 3/8″ Screws
[:en]One 1/4" and one 3/8" screw, matching our Thread Cube, Rod Clamp and Accessory Rods.[:de]Eine 1/4" und eine 3/8" Schraube, passend für unsere Thread Cube, Rod Clamp und Accessory Rods.[:]
3,99 6,99 

plus shipping costs

Select options
Rod Clamp 15mm
Rod Clamp 15mm
[:de]Die praktische Rod Clamp, zum Montieren von 15er Rohren an jedem Kamerasetup. Die Schraubplatte kommt mit 1/4 Zoll und 3/8 Zoll Schrauben und ARRI Locating Pins.[:en]The practical Rod Clamp, for mounting 15 mm rods to every camera setup. The screw plate comes with 1/4 inch and 3/8 inch screws and ARRI locating pins.[:]
55,00 

plus shipping costs

Read more
4mm Allen Key with T-Handle
4mm Allen Key with T-Handle
[:en]Wiha 4mm Allen key with T-handle in 150mm length. Perfect for our Thread Cubes, Rod Clamp and Accessory Rods![:de]Wiha 4mm Inbusschlüssel mit T-Griff in der Länge 150mm. Perfekt für unsere Thread Cubes, Rod Clamp und Accessory Rods![:]
6,99 

plus shipping costs

Add to cart
Accessory Rods 15mm
Accessory Rods 15mm
[:de]Der Industriestandard, das 15mm Rohr zur Montage von Funkschärfe-Motoren und Zubehör in den Längen 40, 80 und 120mm. Mittels versenkter 3/8" & 1/4" Schraube universell montierbar, perfekt auch in Kombination mit unserer Rod Clamp.[:en]The industry standard, the 15mm rod for mounting wireless focus motors and accessories in the lengths 40, 80 and 120mm. Flexible mounting with recessed 3/8" & 1/4" screw, perfect also in combination with our Rod Clamp.[:]
32,00 44,00 

plus shipping costs

Select options